Type: New designsIndustry: Marine electronicsProduct: 15.6″ high-resolution display and touch subassemblyOutcome: A drop-in dashboard subassembly that works in sun and salt water

The customer

An OEM in the marine space, building helm electronics for boats.

The design request

The customer needed a dashboard display that works where boats actually run: in direct sun, with salt water on the glass.

  • Readable in direct sunlight.
  • Touch that works with salt water on the screen.
  • Low heat. The display sits inside a dashboard with little room to shed heat.
  • Fit the dash without redesigning it.

What DCLTEK did

  1. Chose a high-resolution 15.6″ display with the brightness to stay viewable in direct sunlight.
  2. Supplied a touch panel designed for the application, so touch performs even with salt water present.
  3. Picked the backlight and electronics for low heat, so the display adds as little heat to the unit as possible.
  4. Worked with the customer on the mechanical design, so the subassembly drops straight into their dashboard.

The result

A display and touch subassembly that drops into the customer’s dashboard and performs as the application demands, in sun and salt water.

Why it matters

Salt water and sunlight defeat ordinary touch displays. Getting both right, and keeping heat down, takes a display matched to the boat, not pulled from a catalog.

Related: Marine displays · Touch panels

Building for the water? Talk to the team that built this one.