Type: New designsIndustry: Commercial foodservice equipmentProduct: Touch display for ovens and air fryersOutcome: A display that holds up on the kitchen line

The customer

A commercial foodservice equipment maker building ovens and air fryers for fast food kitchens.

The design request

A fast food kitchen is one of the toughest places to put a touch screen. The customer needed a display built into the front of their ovens and air fryers.

  • Heat. The display sits right next to the cooking chamber.
  • Grease and water. Crews touch it with wet, oily or gloved hands, and touch still has to respond correctly.
  • Harsh cleaning. The screen gets wiped down with degreasers and sanitizers every shift.
  • Readable at a glance under bright kitchen lighting, from an angle.
  • Thousands of presses a day, on equipment expected to last years.

What DCLTEK did

  1. Picked a wide-temperature panel with headroom above the measured temperature at the mounting location.
  2. Tuned the touch for the kitchen. Configured the PCAP controller for wet and greasy operation so splashes don’t register as presses.
  3. Specified the cover glass to resist grease, fingerprints and cleaning chemicals.
  4. Sealed the front to keep grease and moisture out of the display stack.
  5. Raised brightness for readability under kitchen lighting.
  6. Validated it with thermal, cleaning-chemical and touch testing before release, with DCLTEK oversight at the factory.

The result

  • In production on the customer’s oven and air fryer lines.
  • Reliable touch with wet or greasy hands.
  • Holds up to daily cleaning without clouding or coating wear.

Why it matters

A consumer-grade touch screen fails fast in a commercial appliance. DCLTEK designs for the environment first (heat, grease, chemicals and abuse) and then builds it consistently at volume.

Related: Displays for commercial appliances

Putting a display somewhere tough? Talk to the team that solved this one.